|
Environmental Measurements Limited |
|
The DataTrec2 (DT2) data logger is a dedicated WIND or RAIN two channel data logger. |
Product Summary |
|
· Small size and low price. · Low Power consumption. · Analogue and digital Channel. · Current battery level function. · Runs for 18 months on four user-replaceable AA batteries (typical). · PC interface through HyperTerminal or similar Terminal program. · Non-volatile EEPROM memory retain data even if batteries fail. |
|
RAIN:
The DT2 RAIN comprises of a digital channel for the measurement of a contact closure from a tipping bucket raingauge and there is a 0-1V analogue channel for the addition of an analogue sensor (for example, temperature). The unit is fully compatible with EML’s full range of tipping bucket raingauges. DT2 RAIN is fully configurable by the user to allow easy modifications of the sensors calibration factor.
WIND:
The DT2 WIND comprises of a digital channel for measurement of contact closure from an anemometer and an analogue channel for measurement of wind direction from a potentiometer style vane. (e.g. EML’s WSD1). The unit is fully configurable by the user for modifications to the calibration factor needed or the DT2 WIND can be supplied with one of our wind sensors for a fully operational wind monitoring system. A full range of masts and mounting accessories are available. The addition of a wind display is also possible.
A special RS232 Cable with reset button (DT Cable) is fitted between the logger and a PC communications port. The DT2 Data loggers are powered by 4 alkaline batteries. |
|
Ordering information: DT2_WIND Dedicated Wind Two Channel Datalogger. DT2_RAIN Dedicated Rain Two Channel Datalogger. DT_CABLE DT logger to PC cable Compatibles, 9 way ‘D’.
Accessories and related products: ARG100/DT2 Aerodynamic gauge fitted with plug to suit DT2 RAIN datalogger. RMS1 Rain monitoring system, includes ARG100, RGB1, DT2 RAIN logger, and cable. RMS2 Rain monitoring add-on systems, includes ARG100, RGB1, DT2 RAIN logger. WMS1 Wind monitoring system, includes WSS1(including: Wind sensor, 2-metre mast and guy rope kit), DT2 Wind logger, brackets.and DT cable. WMS2 Wind monitoring system, includes WSS1(including: Wind sensor, 2-metre mast and guy rope kit), DT2 Wind logger and brackets. WMS1_Display Wind monitoring system, includes WSS1(including: Wind sensor, 2-metre mast and guy rope kit), DT2 Wind logger, brackets.and DT cable. With Vaisala WD30 display in a waterproof, clear lid enclosure. WMS2_Display Wind monitoring system, includes WSS1(including: Wind sensor, 2-metre mast and guy rope kit), DT2 Wind logger and brackets. With Vaisala WD30 display in a waterproof, clear lid enclosure.
|
|
A DT2 data logger |
|
To contact us: |
